单片机的蜂鸣器演奏 生日歌

如题所述

你一个分也没给，不想给你说，还是做下好人吧！
要想用模拟歌声首先要定义1234567不同的音符，做个h文件放这里，，你后做其他的歌曲可以共享。这里网上可以找到，我给你一个。。然后建立个歌曲主程序，根据歌谱子，结合你的音符定义给他他编码，把编的码放到一个数组里面然后输出就好了，，下面我给你一首歌作为例子，，我也没做个你那个什么生日歌，你自己去编码吧，，有谱子很好编码的
/**************************************************************************

SOUND PLAY FOR 51MCU

COPYRIGHT (c) 2005 BY JJJ.
-- ALL RIGHTS RESERVED --

File Name: SoundPlay.h
Author: Jiang Jian Jun
Created: 2005/5/16
Modified: NO
Revision: 1.0

*******************************************************************************/

/*说明**************************************************************************
曲谱存贮格式 unsigned char code MusicName{音高，音长，音高，音长...., 0,0}; 末尾:0,0 表示结束(Important)

音高由三位数字组成：
个位是表示 1~7 这七个音符
十位是表示音符所在的音区:1-低音，2-中音，3-高音;
百位表示这个音符是否要升半音: 0-不升，1-升半音。

音长最多由三位数字组成：
个位表示音符的时值，其对应关系是：
|数值(n): |0 |1 |2 |3 | 4 | 5 | 6
|几分音符: |1 |2 |4 |8 |16 |32 |64 音符=2^n
十位表示音符的演奏效果(0-2): 0-普通，1-连音，2-顿音
百位是符点位: 0-无符点，1-有符点

调用演奏子程序的格式
Play(乐曲名,调号,升降八度,演奏速度);
|乐曲名 : 要播放的乐曲指针,结尾以(0,0)结束;
|调号(0-11) : 是指乐曲升多少个半音演奏;
|升降八度(1-3) : 1:降八度, 2:不升不降, 3:升八度;
|演奏速度(1-12000): 值越大速度越快;

***************************************************************************/
#ifndef __SOUNDPLAY_H_REVISION_FIRST__
#define __SOUNDPLAY_H_REVISION_FIRST__

//**************************************************************************

#define SYSTEM_OSC 12000000 //定义晶振频率12000000HZ
#define SOUND_SPACE 4/5 //定义普通音符演奏的长度分率,//每4分音符间隔
sbit BeepIO = P3^7; //定义输出管脚

unsigned int code FreTab[12] = { 262,277,294,311,330,349,369,392,415,440,466,494 }; //原始频率表
unsigned char code SignTab[7] = { 0,2,4,5,7,9,11 }; //1~7在频率表中的位置
unsigned char code LengthTab[7]= { 1,2,4,8,16,32,64 };
unsigned char Sound_Temp_TH0,Sound_Temp_TL0; //音符定时器初值暂存
unsigned char Sound_Temp_TH1,Sound_Temp_TL1; //音长定时器初值暂存
//**************************************************************************
void InitialSound(void)
{
BeepIO = 0;
Sound_Temp_TH1 = (65535-(1/1200)*SYSTEM_OSC)/256; // 计算TL1应装入的初值 (10ms的初装值)
Sound_Temp_TL1 = (65535-(1/1200)*SYSTEM_OSC)%256; // 计算TH1应装入的初值
TH1 = Sound_Temp_TH1;
TL1 = Sound_Temp_TL1;
TMOD |= 0x11;
ET0 = 1;
ET1 = 0;
TR0 = 0;
TR1 = 0;
EA = 1;
}

void BeepTimer0(void) interrupt 1 //音符发生中断
{
BeepIO = !BeepIO;
TH0 = Sound_Temp_TH0;
TL0 = Sound_Temp_TL0;
}
//**************************************************************************
void Play(unsigned char *Sound,unsigned char Signature,unsigned Octachord,unsigned int Speed)
{
unsigned int NewFreTab[12]; //新的频率表
unsigned char i,j;
unsigned int Point,LDiv,LDiv0,LDiv1,LDiv2,LDiv4,CurrentFre,Temp_T,SoundLength;
unsigned char Tone,Length,SL,SH,SM,SLen,XG,FD;
for(i=0;i<12;i++) // 根据调号及升降八度来生成新的频率表
{
j = i + Signature;
if(j > 11)
{
j = j-12;
NewFreTab[i] = FreTab[j]*2;
}
else
NewFreTab[i] = FreTab[j];

if(Octachord == 1)
NewFreTab[i]>>=2;
else if(Octachord == 3)
NewFreTab[i]<<=2;
}

SoundLength = 0;
while(Sound[SoundLength] != 0x00) //计算歌曲长度
{
SoundLength+=2;
}

Point = 0;
Tone = Sound[Point];
Length = Sound[Point+1]; // 读出第一个音符和它时时值

LDiv0 = 12000/Speed; // 算出1分音符的长度(几个10ms)
LDiv4 = LDiv0/4; // 算出4分音符的长度
LDiv4 = LDiv4-LDiv4*SOUND_SPACE; // 普通音最长间隔标准
TR0 = 0;
TR1 = 1;
while(Point < SoundLength)
{
SL=Tone%10; //计算出音符
SM=Tone/10%10; //计算出高低音
SH=Tone/100; //计算出是否升半
CurrentFre = NewFreTab[SignTab[SL-1]+SH]; //查出对应音符的频率
if(SL!=0)
{
if (SM==1) CurrentFre >>= 2; //低音
if (SM==3) CurrentFre <<= 2; //高音
Temp_T = 65536-(50000/CurrentFre)*10/(12000000/SYSTEM_OSC);//计算计数器初值
Sound_Temp_TH0 = Temp_T/256;
Sound_Temp_TL0 = Temp_T%256;
TH0 = Sound_Temp_TH0;
TL0 = Sound_Temp_TL0 + 12; //加12是对中断延时的补偿
}
SLen=LengthTab[Length%10]; //算出是几分音符
XG=Length/10%10; //算出音符类型(0普通1连音2顿音)
FD=Length/100;
LDiv=LDiv0/SLen; //算出连音音符演奏的长度(多少个10ms)
if (FD==1)
LDiv=LDiv+LDiv/2;
if(XG!=1)
if(XG==0) //算出普通音符的演奏长度
if (SLen<=4)
LDiv1=LDiv-LDiv4;
else
LDiv1=LDiv*SOUND_SPACE;
else
LDiv1=LDiv/2; //算出顿音的演奏长度
else
LDiv1=LDiv;
if(SL==0) LDiv1=0;
LDiv2=LDiv-LDiv1; //算出不发音的长度
if (SL!=0)
{
TR0=1;
for(i=LDiv1;i>0;i--) //发规定长度的音
{
while(TF1==0);
TH1 = Sound_Temp_TH1;
TL1 = Sound_Temp_TL1;
TF1=0;
}
}
if(LDiv2!=0)
{
TR0=0; BeepIO=0;
for(i=LDiv2;i>0;i--) //音符间的间隔
{
while(TF1==0);
TH1 = Sound_Temp_TH1;
TL1 = Sound_Temp_TL1;
TF1=0;
}
}
Point+=2;
Tone=Sound[Point];
Length=Sound[Point+1];
}
BeepIO = 0;
}
//**************************************************************************
#endif

同一首歌编码输出
#include <REG52.H>
#include "SoundPlay.h"

void Delay1ms(unsigned int count)
{
unsigned int i,j;
for(i=0;i<count;i++)
for(j=0;j<120;j++);
}

//*****************************Music******************************************************

//同一首歌
unsigned char code Music_Same[]={ 0x0F,0x01, 0x15,0x02, 0x16,0x02, 0x17,0x66, 0x18,0x03,
0x17,0x02, 0x15,0x02, 0x16,0x01, 0x15,0x02, 0x10,0x02,
0x15,0x00, 0x0F,0x01, 0x15,0x02, 0x16,0x02, 0x17,0x02,
0x17,0x03, 0x18,0x03, 0x19,0x02, 0x15,0x02, 0x18,0x66,
0x17,0x03, 0x19,0x02, 0x16,0x03, 0x17,0x03, 0x16,0x00,
0x17,0x01, 0x19,0x02, 0x1B,0x02, 0x1B,0x70, 0x1A,0x03,
0x1A,0x01, 0x19,0x02, 0x19,0x03, 0x1A,0x03, 0x1B,0x02,
0x1A,0x0D, 0x19,0x03, 0x17,0x00, 0x18,0x66, 0x18,0x03,
0x19,0x02, 0x1A,0x02, 0x19,0x0C, 0x18,0x0D, 0x17,0x03,
0x16,0x01, 0x11,0x02, 0x11,0x03, 0x10,0x03, 0x0F,0x0C,
0x10,0x02, 0x15,0x00, 0x1F,0x01, 0x1A,0x01, 0x18,0x66,
0x19,0x03, 0x1A,0x01, 0x1B,0x02, 0x1B,0x03, 0x1B,0x03,
0x1B,0x0C, 0x1A,0x0D, 0x19,0x03, 0x17,0x00, 0x1F,0x01,
0x1A,0x01, 0x18,0x66, 0x19,0x03, 0x1A,0x01, 0x10,0x02,
0x10,0x03, 0x10,0x03, 0x1A,0x0C, 0x18,0x0D, 0x17,0x03,
0x16,0x00, 0x0F,0x01, 0x15,0x02, 0x16,0x02, 0x17,0x70,
0x18,0x03, 0x17,0x02, 0x15,0x03, 0x15,0x03, 0x16,0x66,
0x16,0x03, 0x16,0x02, 0x16,0x03, 0x15,0x03, 0x10,0x02,
0x10,0x01, 0x11,0x01, 0x11,0x66, 0x10,0x03, 0x0F,0x0C,
0x1A,0x02, 0x19,0x02, 0x16,0x03, 0x16,0x03, 0x18,0x66,
0x18,0x03, 0x18,0x02, 0x17,0x03, 0x16,0x03, 0x19,0x00,
0x00,0x00 };

//***********************************************************************************
main()
{
InitialSound();
while(1)
{
Play(Music_Girl,0,3,360);
Delay1ms(500);
Play(Music_Same,0,3,360);
Delay1ms(500);
Play(Music_Two,0,3,360);
Delay1ms(500);
}
}

温馨提示：内容为网友见解，仅供参考

当前网址：https://11.t2y.org/zz/f2747v8fq.html